These adorable crochet baby sandals feature a delicate open-toe design, a comfortable crochet sole, and a pretty floral strap across the front. The pattern creates a soft, lightweight pair of sandals perfect for warm-weather outfits, baby photography, gifts, and handmade boutiques.
The sandals in the photo are worked in a soft cream-colored yarn, but they can easily be customized in any color combination.
Important: This pattern is intended for decorative and supervised use. Crochet baby footwear should fit comfortably without being tight, and babies should never wear small detachable embellishments such as buttons or beads that could become choking hazards.
Materials
- Fine cotton or cotton-blend crochet yarn
- Crochet hook suitable for your yarn
- Yarn needle
- Small scissors
- Measuring tape
- Stitch markers
- Optional: fabric or leather sole for additional structure
For a delicate baby-sandal look, a lightweight cotton yarn works especially well.
Suggested yarn
Use a soft, smooth sport or DK-weight cotton yarn.
A mercerized cotton can also give the sandals a beautiful polished finish.
Suggested hook
Approximately 2.5–3.5 mm, depending on your yarn and tension.
Always make a small test swatch first. The stitches should be firm enough that the sole does not become overly stretchy.
Sizing
The pattern can be adjusted according to the baby’s foot measurements.
Approximate finished sole lengths:
| Size | Approx. Foot Length |
|---|---|
| Newborn | 3.5 in / 9 cm |
| 0–3 months | 3.75 in / 9.5 cm |
| 3–6 months | 4.25 in / 10.8 cm |
| 6–9 months | 4.5 in / 11.5 cm |
| 9–12 months | 4.75 in / 12 cm |
Tip: Measuring the baby’s actual foot is always better than relying only on age.
For the sample size, work the sole until it measures approximately 4.25 inches / 10.8 cm.
Abbreviations
US crochet terminology:
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- st / sts – stitch / stitches
- inc – increase
- sk – skip
- rep – repeat
- rnd – round
Part 1 – Crochet the Sole
The sandal begins with a simple oval-shaped sole.
Round 1
Chain 12.
Starting in the second chain from the hook:
- Work 1 sc in each of the next 10 chains.
- Work 3 sc in the last chain.
- Continue working along the opposite side of the foundation chain.
- Work 1 sc in each of the next 9 chains.
- Work 2 sc in the final chain.
Join with a sl st to the first sc.
Do not turn.
You should now have an elongated oval.
Round 2
Chain 1.
Work 1 sc in each stitch along the straight side.
At each rounded end, work increases to keep the sole flat.
A simple increase sequence is:
- 2 sc in each of the next 3 stitches
- 1 sc across the straight section
- 2 sc in each of the next 3 stitches
- 1 sc across the remaining straight section
Join with a sl st.
Round 3
Chain 1.
Continue working sc around the entire sole.
Increase only around the rounded toe and heel areas as necessary to keep the sole flat.
Do not add too many increases. The sole should remain smooth rather than ruffled.
Join with a sl st.
Check the size
Measure the sole from heel to toe.
If it is too short, add another round.
If it is too long, remove the last round and adjust your stitch count.
Part 2 – Create the Sole Edge
To give the sandal a slightly defined edge, work one additional round of sc through the back loop only.
Edge Round
Chain 1.
Work 1 sc in the back loop only of every stitch around.
Join with a sl st.
This creates a subtle ridge around the edge of the sole and gives the sandal a more structured appearance.
Fasten off if you want to change colors.
Part 3 – Crochet the Decorative Front Strap
The beautiful floral strap is the main feature of these baby sandals.
The strap stretches across the top of the foot and is decorated with small crochet flowers.
You will create a long narrow chain and attach small flowers along it.
Part 4 – Make the Front Strap
Chain approximately 20–24 chains, depending on the baby’s foot width.
The strap should be long enough to reach comfortably from one side of the sandal to the other.
Row 1
Starting in the second chain from the hook:
Work 1 sc in each chain across.
Chain 1 and turn.
Row 2
Work 1 sc in each stitch across.
Fasten off, leaving a long tail for sewing.
The finished strap should be narrow and delicate.
For a wider strap, work another row of sc.
Part 5 – Create the Crochet Flowers
Make several small five-petal flowers.
For the sandal shown in the photograph, approximately 5–7 small flowers can be used across the front strap.
You can make all the flowers the same color or alternate two coordinating colors.
Small Flower
Make a magic ring.
Alternatively, chain 4 and join with a sl st to form a ring.
Round 1
Into the ring:
- Ch 1
- 5 sc into the ring
- Sl st to the first sc
Do not fasten off.
Petal 1
Chain 2.
Work:
- 2 dc
- 1 tr
- 2 dc
- 1 sl st
all into the next stitch.
This creates the first rounded petal.
Remaining Petals
Repeat the same sequence around the flower:
ch 2, 2 dc, 1 tr, 2 dc, sl st
Work one petal into each of the remaining stitches.
You should have approximately five petals.
Fasten off and pull the center closed.
Leave a long yarn tail for attaching the flower.
Part 6 – Shape the Flowers
Gently flatten each flower with your fingers.
Arrange the petals so they overlap slightly.
Do not stretch the flowers excessively.
For a softer, vintage appearance, gently press the flowers with your fingers rather than blocking them heavily.
Part 7 – Attach the Flowers to the Strap
Lay the strap flat.
Arrange the flowers across the strap in a slightly curved line.
A beautiful arrangement is:
Flower – Flower – Flower – Flower – Flower
For a wider sandal, add one or two additional flowers near the sides.
Using a yarn needle and the long yarn tails, stitch each flower securely to the strap.
Make several small stitches through the center of each flower.
Keep the stitching on the back of the strap as neat as possible.
Part 8 – Create the Side Attachments
The decorative strap needs to be attached to both sides of the sandal.
Position the strap across the front of the sole.
Place each end approximately 1–1.5 inches / 2.5–4 cm behind the toe, depending on the size of the sandal.
Check the placement before sewing.
The strap should sit comfortably over the baby’s toes without pressing against them.
Sew both ends securely to the sides of the sole.
Part 9 – Create the Back Strap
For a sandal that stays securely on the foot, make a small back strap.
Chain approximately 18–22 chains, depending on the baby’s ankle size.
Work 1–2 rows of sc across the chain.
The strap should form a gentle loop around the heel and ankle.
Attach one side securely to the sandal.
Part 10 – Add the Ankle Strap
For the delicate ankle strap shown in the photograph, crochet a narrow chain long enough to pass comfortably around the baby’s ankle.
Work approximately 25–35 chains, adjusting according to the baby’s measurement.
Work one row of sc across the chain if a sturdier strap is desired.
Attach one end to the back of the sandal.
The opposite end can be attached to the other side of the sandal, creating a soft ankle loop.
Do not make the strap tight.
You should be able to comfortably slide a finger between the strap and the baby’s ankle.
Part 11 – Decorative Scalloped Edge
To create the pretty lace-like edge visible around the front of the sandal, work a decorative scallop edging.
Attach the yarn near the front edge.
Scallop
Work:
sl st, ch 2, 4 dc in the same stitch, ch 2, sl st in the next stitch.
Repeat this sequence around the desired edge.
This produces small rounded scallops that complement the crochet flowers.
Part 12 – Add the Flower Details
For an even more delicate appearance, you can add a tiny embroidered center to each flower.
Use a contrasting strand of the same cotton yarn.
Make several small stitches in the center of each flower.
Avoid using beads, sequins, pearls, or other small loose decorations on baby footwear, as these can become choking hazards.
Part 13 – Finishing the Sandal
Weave all loose yarn ends into the back of the work using a yarn needle.
Work the yarn through several stitches in different directions.
Trim the excess yarn carefully.
Check every attachment point.
The flowers, straps, and sole should all be securely connected.
Part 14 – Make the Second Sandal
Repeat the entire pattern to make the second sandal.
Try to keep both soles the same size.
When attaching the flowers, make sure the arrangement is symmetrical.
For a matching pair, use the same number of flowers and approximately the same spacing on both sandals.
Optional – Add a Non-Slip Sole
If the sandals will be worn by a baby who is beginning to stand or walk, you can add a soft non-slip sole.
Cut a piece of flexible fabric or baby-safe sole material to match the crochet sole.
Sew it securely to the underside.
Avoid hard or rigid materials that could make the sandal uncomfortable.
For very young babies, the crochet sole alone may be preferable for a soft decorative sandal.
Finishing Touches
Before giving the sandals as a gift, check the following:
- The sole is flat.
- There are no loose yarn ends.
- The flowers are securely attached.
- The straps are not tight.
- There are no sharp or hard embellishments.
- Both sandals are approximately the same size.
- The baby’s toes have plenty of room.
- The sandal does not restrict ankle movement.
Customization Ideas
These sandals can easily be customized.
Classic White
Use ivory or white cotton yarn with matching flowers for a delicate christening or newborn-photo look.
Blush Pink
Use cream for the sole and soft pink for the flowers.
Baby Blue
Use ivory for the sandal and pale blue flowers.
Vintage Style
Use beige, cream, and muted pastel shades for a timeless handmade appearance.
Summer Garden
Combine several pastel colors for the flowers while keeping the sole a neutral cream.
Pattern Notes
The number of chains and rounds may need to be adjusted depending on your yarn weight, crochet hook, and personal tension.
For the best fit, measure the baby’s foot first and crochet the sole to the desired finished length rather than relying exclusively on the age chart.
The floral decoration can also be modified. Use fewer flowers for a minimalist sandal or add additional flowers for a fuller, more elaborate design.
This pattern is designed to create the overall look of the sandals shown in the reference photo, with an oval crochet sole, an open front, a floral decorative strap, scalloped edging, and a delicate ankle strap.
