Create a beautiful handmade Christmas decoration with this Crochet Christmas Tree Wall Hanging Tutorial! This charming design features a cream-colored tree, deep green borders, bright red bows, shiny decorative bells, and a sparkling star at the top.
The finished piece looks like a traditional Christmas tree made entirely from crochet, with several triangular layers that create a lovely tiered effect. It is perfect for decorating your home during the holiday season, displaying on a wall or door, or giving as a thoughtful handmade Christmas gift.
This project combines simple crochet stitches with decorative accessories, making it a fun seasonal craft for crocheters who enjoy creating festive home decorations.
Please note: The instructions below are an original, photo-inspired tutorial. The image does not provide an exact stitch chart or original pattern, so the stitch counts and measurements are adjustable suggestions designed to help you recreate a similar appearance.
Materials You Will Need
Gather the following materials before beginning your project.
- Cream or ivory yarn: For the main body of the Christmas tree.
- Dark green yarn: For the outer border and decorative garland.
- Red yarn: For the bows.
- Small amounts of white yarn: For the top decorations, if desired.
- Crochet hook: Choose a size suitable for your yarn. A hook around 3.5 mm to 4.5 mm is a good starting point for medium-weight yarn.
- Decorative bells: Gold and silver bells in assorted sizes.
- Star ornament: A small silver star or a crocheted star.
- Yarn needle: For sewing the pieces together and hiding yarn ends.
- Scissors: For cutting yarn.
- Stitch markers: Optional, but helpful when shaping the tree.
- Sewing needle and thread: For attaching lightweight embellishments securely.
- Small hanging loop or ribbon: If you plan to hang the finished decoration.
Choose yarns with similar thicknesses so that the finished tree has an even texture. Cotton yarn is a good choice when you want clear stitch definition and a sturdy result.
Finished Size
The finished size depends on the yarn, hook, and number of rows used.
As a general guide, a medium-sized wall hanging may measure approximately 10–14 inches tall, excluding the hanging loop and star. You can make it smaller for a tabletop ornament or larger for a statement Christmas decoration.
If you want a wider tree, increase the number of stitches in each layer. For a taller tree, add more rows and adjust the spacing between the tiers.
Abbreviations
This tutorial uses standard US crochet terminology.
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- st: stitch
- sts: stitches
- rep: repeat
- FO: fasten off
Step 1: Create the Main Christmas Tree Shape
The main body is worked in cream or ivory yarn. You can create it as one large tree-shaped piece with several stepped layers, or crochet individual sections and join them together.
For a design similar to the photograph, the individual-section method makes it easier to create the distinct triangular tiers.
Making the first tier
- With cream yarn, make a foundation chain long enough for the width you want at the bottom of the first section.
- Work a row of single crochet stitches across the chain.
- Chain one and turn.
- Continue working rows of single crochet, keeping the edges straight.
- Gradually decrease stitches near the outer edges to create a triangular or trapezoid-like section.
- Continue until the section reaches the desired height.
- Fasten off and weave in the ends.
The exact number of stitches is flexible. The important detail is to create a shape that becomes narrower toward the top.
Making additional tiers
Repeat the process to create several smaller sections.
Each new tier should be narrower than the one below it. Arrange the pieces from largest to smallest, overlapping their upper edges slightly to produce the layered silhouette of a Christmas tree.
For a look similar to the reference image, prepare four or five sections, depending on the desired size.
Before joining them, place the sections on a flat surface and check that the sides form a balanced tree shape.
Step 2: Join the Tree Sections
Once all the cream sections are ready, arrange them in descending order.
- Place the largest section at the bottom.
- Position the next section above it, allowing the bottom edge to overlap the top of the larger section.
- Continue arranging the remaining sections until the smallest one forms the tree’s tip.
- Use stitch markers to hold the sections in place.
- Sew the overlapping edges together with matching yarn and a yarn needle.
Try to keep the central line straight. This will help the tree look symmetrical and make it easier to attach the decorative garland later.
If you prefer a sturdier wall hanging, you can add a second crocheted backing in cream yarn and sew the two layers together around the edges.
Step 3: Crochet the Dark Green Border
The deep green edging is one of the most important features of this design. It outlines each tier and creates the appearance of evergreen branches.
Attach green yarn to the edge of the cream tree.
- Insert the hook into an edge stitch.
- Pull up a loop of green yarn.
- Work single crochet stitches evenly along the outer edge.
- At corners and points, work extra stitches when needed to prevent the border from curling.
- Continue around the tree’s outline.
- Join with a slip stitch and fasten off.
If the tree consists of separate tiers, outline each tier before sewing the sections together. This creates a more pronounced layered effect.
Avoid placing too many stitches around the edges, as excess stitches can cause the border to ripple. If the edge pulls inward, add a few stitches; if it waves, remove some.
Step 4: Add the Green Garland
The raised green garland creates the zigzag pattern that crosses the cream-colored tree in the photograph.
You can make it by crocheting a long, narrow strip or by working directly onto the tree.
Option A: Crochet a separate garland
- With green yarn, make a foundation chain long enough to cross the first section diagonally.
- Work one row of single crochet stitches.
- Continue until the strip reaches the desired width.
- Fasten off, leaving a long tail for sewing.
Make additional strips for the other tiers, adjusting their lengths as the tree becomes wider toward the bottom.
Arrange the strips in a zigzag pattern, allowing them to rise toward the center and slope down toward each side.
Sew the strips securely onto the cream base.
Option B: Crochet directly onto the tree
Attach green yarn at one side of the tree and work slip stitches or single crochet stitches along the planned garland path.
Use stitch markers to map out the zigzag before crocheting. This is especially helpful if you want the garland to follow the same angle on each tier.
For a raised, branch-like appearance, work two rows of single crochet along the garland path.
Step 5: Make the Red Crochet Bows
The bright red bows provide a festive contrast against the cream and green yarn.
You can make each bow from two small loops and two tails, then wrap yarn around the center to hold everything together.
Crochet the bow loops
- With red yarn, chain approximately 10–14 stitches, depending on the size you want.
- Work single crochet stitches back across the chain.
- Chain one, turn, and work another row if you want a thicker bow.
- Fasten off, leaving a long sewing tail.
- Fold the strip into a loop and secure the ends.
Repeat the process to create a second loop of similar size.
Make the bow tails
- Chain a shorter length of red yarn.
- Work one or two rows of single crochet.
- Shape the end into a slight point if desired.
- Fasten off.
Make two tails and arrange them beneath the loops.
Assemble the bow
- Position the two loops side by side.
- Place the tails underneath.
- Wrap red yarn tightly around the center several times.
- Tie securely at the back.
- Sew the completed bow onto the tree.
Make several bows in different sizes, using a larger bow near the lower section and smaller bows toward the top.
Step 6: Attach the Bows to the Tree
Arrange the bows along the center of the tree, leaving enough space between them for the bells and garland.
Place the largest bow on the lower tier and use smaller bows as you move toward the top.
Thread a yarn needle with red yarn and sew each bow through its center. Add a few stitches behind the loops to prevent them from twisting.
Before securing each bow permanently, step back and check the spacing. Even spacing creates a balanced design, while slightly varied spacing gives the decoration a more handmade appearance.
Step 7: Add the Decorative Bells
Small metallic bells make this Christmas tree especially festive. The reference design uses both gold and silver tones.
Choose lightweight bells so they do not pull the crocheted fabric out of shape.
- Decide where each bell should be placed.
- Attach each bell using a short piece of strong thread or yarn.
- Sew through a sturdy stitch rather than through a loose loop.
- Tie the attachment securely on the back.
- Check that the bells hang freely and do not cover the bows.
For a balanced look, distribute the gold and silver bells across the different tiers. Place some along the green garland and others near the outer edges.
If the decoration will be used around young children or pets, avoid small detachable parts and use securely stitched, child-safe alternatives.
Step 8: Make or Attach the Star
The silver star at the top completes the Christmas tree.
The simplest option is to use a lightweight decorative star with a small attachment loop.
To make a crocheted star, use metallic silver yarn or ordinary silver-colored yarn.
Simple crochet star
- Make a magic ring.
- Work a small group of stitches into the ring, leaving enough room to form five points.
- Use chains and slip stitches to create five evenly spaced points.
- Tighten the magic ring and fasten off.
- Weave in the yarn ends.
- Shape the points gently with your fingers.
Because crochet star patterns vary, the number of stitches will depend on the yarn and desired size. A ready-made star is also a practical choice if you want the decoration to resemble the photograph more closely.
Sew or tie the star securely to the top of the tree.
Step 9: Add Small Details Near the Top
The top section of the reference design includes tiny red-and-white decorations beneath the star.
You can recreate this detail using small crocheted ornaments.
- Crochet two tiny rounded shapes using red yarn.
- Add a small cream or white section at one end.
- Use a yarn needle to secure the color changes or sew the white detail onto each ornament.
- Attach the ornaments side by side near the top of the tree.
Alternatively, use small red-and-white pom-poms or miniature wrapped-gift decorations.
Keep these details lightweight so the narrow top of the tree does not bend.
Step 10: Add Optional Decorative Details
Once the main elements are attached, inspect the entire tree and add any final touches.
You might include:
- Small embroidered snowflakes.
- Tiny white stitches that resemble snow.
- Additional gold or silver bells.
- A narrow hanging loop at the back.
- A few green stitches to reinforce the garland.
- A crocheted backing to make the decoration more substantial.
Avoid overcrowding the design. The cream background, green outline, red bows, and metallic bells already create a strong Christmas look.
Step 11: Finish and Shape the Tree
Before displaying your project, weave in every loose yarn end.
Lay the tree flat on a clean surface and gently adjust the tiers and garland. If the fabric curls, lightly block it according to the yarn manufacturer’s care instructions.
For cotton yarn, gentle steam or damp blocking may help, but avoid direct heat on synthetic fibers and decorative plastic or metallic components.
If the tree will be hung on a wall, attach a small loop or ribbon securely to the back near the top. For a door decoration, make sure the hanging method can support the weight of the bells and other embellishments.
Helpful Tips for a Beautiful Result
Keep the tree symmetrical. Check the alignment of the tiers before sewing them together.
Use consistent tension. Uneven tension can make the sections look different in size, even when they have similar stitch counts.
Choose contrasting colors. Cream, deep green, and bright red create a classic Christmas palette. Gold and silver accents add a festive finish.
Secure every embellishment. Bells, bows, and the star should be firmly attached, especially if the decoration will be handled frequently.
Test the layout before sewing. Arrange all the decorations on the tree first. Take a photograph of the arrangement if you want to remember the placement.
Make the design your own. Replace the bells with crocheted ornaments, use a gold star, or add small white snowflakes for a different seasonal style.
Frequently Asked Questions
Is this crochet Christmas tree suitable for beginners?
Yes, with patience. The basic sections use simple crochet stitches, while shaping the tiers and attaching the decorations require a little extra care. Beginners can simplify the project by making one flat tree shape and adding the green border afterward.
Can I make the tree without sewing several sections together?
Yes. You can crochet a single tree-shaped base and add the tiered appearance with raised green garland. This method reduces the amount of sewing and may be easier for beginners.
What yarn works best for this project?
Cotton yarn is a good choice for a structured decoration with clearly defined stitches. Acrylic yarn can also work well and is often available in a wide range of Christmas colors.
How can I make the tree larger?
Use a thicker yarn and a suitable larger hook, or increase the width and height of each tier. Keep the proportions consistent so the tree maintains its triangular silhouette.
Can I use this as a Christmas wall hanging?
Absolutely. Add a strong hanging loop to the back and make sure all decorative pieces are securely attached. A crocheted backing can help the tree hang more evenly.
How do I wash the finished decoration?
Check the yarn label and the care instructions for the bells and star. If the embellishments are not washable, spot-clean the crochet fabric gently with a damp cloth and allow it to air-dry completely.
Final Thoughts
This layered crochet Christmas tree is a wonderful way to bring handmade charm into your holiday decorating. Its cream-colored branches, dark green outlines, cheerful red bows, and shiny bells create a traditional Christmas look with plenty of texture and personality.
The project is also easy to personalize. Change the colors, experiment with different bows, or replace the metallic bells with handmade crochet ornaments to create a unique decoration that matches your home.
Whether you display it on a wall, give it as a handmade gift, or make several in different sizes, this crochet Christmas tree is a festive project to enjoy throughout the holiday season.
Happy crocheting, and Merry Christmas!
